Manual

WindO/I-NV2 User's Manual 25-21
2 Monitoring on the MICRO/I
25
Monitor Function
3 Enter the address and then press ENT.
Press CLR to clear all values entered for the address.
Press CAN to stop registering devices.
The device address is registered to Device Monitor.
4 Repeat steps 1 through 3 to register all device addresses to be monitored.
LM
  
bit
1
Select Device
0CLRCAN
ENT
123
456F
789E
ABCDUp Down
1
2
If a device address is invalid, pressing ENT will not return to Device Monitor.
If the connection is 1:N communication, (HG2G-S/-5S/-5F, HG3G/4G) or (HG1F/2F/2S/3F/4F) is
displayed.
The operating procedure is as follows.
1. Enter the station number as a hexadecimal value.
2. Press or .
3. Enter the address.
4. Press ENT.
No.
:
No.
:
LM
Data Del Select
01
Device Monitor
Up Down
Dec/HexDevice