Manual

5 Formatting
24-30 WindO/I-NV2 User’s Manual
Stops operation of the MICRO/I and formats an external memory inserted in the MICRO/I.
5.1 Formatting an External Memory Inserted in the MICRO/I
1 Change communication settings according to the connection method between the computer and the MICRO/I.
If communicating with a MICRO/I inserted in a computer, in the Communication Settings dialog box, select MICRO/I
from Communicate with. To communicate with the MICRO/I as an O/I Link Slave via an O/I Link Master, select
O/I Link Slave. For details, refer to “1.3 Change Communication Settings” on page 24-6.
2 Open project data.
3 On the Online tab, in the Touch Screen group, click Format.
•When Communicate with is set to MICRO/I and Port is set to USB or Serial, a formatting confirmation
message is displayed.
•When Communicate with is set to MICRO/I and Port is set to Ethernet, the Target IP Address dialog box is
displayed. Specify the IP address of the MICRO/I, and then click OK to display the formatting confirmation
message. For details, refer to “To execute any function except project data download” on page 24-9.
•When Communicate with is set to O/I Link Slave, the Target Slave dialog box is displayed. Specify the slave
station of the MICRO/I to communicate with, and then click OK to display the formatting confirmation message.
If Port is set to Ethernet, specify the IP address of the master to be used.
If Port is Ethernet and the via Web
Server Unit check box is selected, specify the port number of the Web Server Unit connected to the destination
MICRO/I. For details, refer to “To execute any function except project data download” on page 24-11.
4 Click Yes.
5 Click Close.
This concludes formatting the external memory.
5 Formatting
HG3G HG2G-5FHG2G-5SHG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
If security is enabled in the MICRO/I project, the Password Screen is displayed. Enter the password.
For details, refer to Chapter 23 “User Accounts and the Security Function” on page 23-1.
During communication with an O/I Link Slave using the online function, O/I Link Master operation is
stopped.