Manual

1 Communicating with the MICRO/I
24-6 WindO/I-NV2 User’s Manual
1.3 Change Communication Settings
To communicate with the MICRO/I in WindO/I-NV2, configure the settings such as communication speed and port
used to match the connection method for the MICRO/I.
1 On the Home tab, in the Project group, click Comm.Setup.
The Communication Settings dialog box is displayed.
2 Change the settings on each tab as necessary and then click OK.
Communicate with
Select the device to communicate with from the following items.
MICRO/I: Communicate with the MICRO/I connected to the computer.
For details, refer to “Using the online function for Ethernet communication” on page 24-8.
MICRO/I
Serial cable
Computer
USB cable
Ethernet cable