Manual

4 Password Input
23-42 WindO/I-NV2 User’s Manual
4.2 Entering the Password in WindO/I-NV2
When a user account assigned with Administrator is configured with a password, or when a dedicated password for
opening the project has been set, the Enter Password dialog box is displayed in WindO/I-NV2 as required and the
user is prompted to enter their password.
The operations that display the Enter Password dialog box are as follows.
• Opening projects
• Reusing screens
• Downloading project data
• Downloading data to external memory
*1
• Downloading data to external memory
*1
while the MICRO/I is running
• Uploading project data
• Uploading external memory data
*1
• Deleting all data
• Deleting external memory data
*1
• Formatting external memory
*1
● Enter Password Dialog Box
HG2G-S/-5S/-5F, HG3G/4G
HG1F/2F/2S/3F/4F
■ User Name
Selects the user name. This item can only be selected when multiple user accounts are registered.
■ Password
Enter the password. The entered password is displayed as “*”.
■ OK
Confirms the entered password and starts verifying the user name and password.
If the entered password is correct, the Enter Password dialog box closes and the operation executes.
If the entered password is incorrect, a confirmation message is displayed.
■ Cancel
Cancels password input and closes the Enter Password dialog box.
*1 External memory inserted into the MICRO/I (HG2G-5F, HG3G/4G, HG2F/3F/4F only)
If Administrator or Other Operation password is
required, the following dialog box appears.
If dedicated password for opening project is required,
the following dialog box appears.