Manual

WindO/I-NV2 User’s Manual 23-21
2 Security Function Configuration Procedure
23
User Accounts and the Security Function
2.3 Protecting the Display and Operation of Screens and Parts
● Protecting the Display of Screens
Here you will configure the security group for a screen to protect the display of that screen.
This section describes an example where the display of base screen 2 is protected when switching to base screen 2 by
pressing the Goto Screen Button.
Configuration Procedure
1 Following the procedure in “Creating a User Account” on page 23-11, create the following user account.
To automatically display the Password screen when the user attempts to switch to a base screen they cannot access
with the current user account using the Goto Screen Button, in the Security dialog box, in the Options tab, select
the Require a password automatically check box. For displaying the Password screen, refer to “4.1 Entering the
Password on the MICRO/I” on page 23-40.
User2
Goto Screen Button
(Switch to base screen 2)
Full
Tank 1
Base screen 1 Base screen 2
No user
MICRO/IMICRO/I
Base screen 2
Can be displayed
Base screen 2
Cannot be
displayed
To change the user account, a button or command is required to open the Password screen.
User Name
Security Group GroupA
User2