Instruction Manual

3-2
 Prevent SafetyOne from falling while moving or transporting the SafetyOne, otherwise damage
or malfunction of the SafetyOne may result.
 Prevent metal fragments and pieces of wire from dropping inside the SafetyOne housing.
 Install SafetyOne, so that there is adequate spacing from walls, heat generating bodies, and
peripherals, taking into consideration space requirements for maintenance and ventilation.
 Install SafetyOne on 35mm DIN rails with BNL6 mounting clips (sold separately) on both sides of
SafetyOne.
 Perform wiring to the connectors with proper cables or ferrules.
 Ground FE terminal to assure electromagnetic compatibility (EMC)
 Use common 0V DC, if different power supplies are used for SafetyOne and other devices (ex.
safety light curtains).
 Install wiring for the inputs and outputs so that it is separated from power lines.
.