Cut Sheet

Switches & Pilot Lights Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks
Circuit Breakers
911
Canada: 888-317-4332 • USA: 800-262-4332
Accessories
Terminal Blocks
Accessories, continued
Part Numbers: Rods, Nuts, Marking Strips, Dust Covers, and Jumpers
Item Appearance Use with Part No. Remarks
Dust
Covers
BNDH15W
BNC230
The overall length is 39.37” (1,000mm).
The material is polycarbonate (UL94-V2).
BNH10W
BNH15MW
BNH15LW
BNH30W
BNH50W BNC320
BN75W BNC420
BN150W BNC520
BN200 BAC820
BN400 BNC1000
Marking Strips
All series
BNM7
Material: polyvinyl chloride (PVC)
Strip dimensions are 0.37”x39” (9.5 x 1,000mm).
BNM9
Material: fiberglass
Strip dimensions are 0.37”x39” (9.5 x 1,000mm).
Marking Strip
Fastener
All series BNM3
Used to prevent marking strips from sliding off terminal
block.
Ring Terminal
Jumpers
BNH10W BNJ16
Jumpers come standard with 6 points (except BNJ62).
Note: insulated jumpers available - add “B” to end of part
number. For example, BNJ26WB.
BNH15MW BNJ26W
BNH15LW BNJ46
BNH30W BNJ56
BNDH15W BNJ26W
BNH50W BNJ62
Fork Terminal
Jumpers
BNH10W BNJ16F
BNH15MW BNJ26FW
BNH15LW BNJ46F
BNH30W BNJ56F
BNDH15W BNJ26FW
M4 Thread Rod
BNDH15W
BNR1
(265mm)
1. Rod and connecting nuts are used to mount dual-decks
collectively.
2. Each connecting nut set includes 1 hex connecting nut
and 1 round connecting nut.
3. The BNR1 rod dimensions are 0.027 “x 10.43” (0.7 x
265mm).
4. The BNR2 rod dimen-sions are 0.027” x 19.69” (0.7 x
500mm).
BNR2
(500mm)
Connecting Nuts
BNR1
BNR2
BNN1
Terminal Block
Removal Tool
BND2
For accessory dimensions, see page 912.