Cut Sheet

Terminal Blocks
910
www.IDEC.com
Accessories
Part Numbers: End Plates, DIN Rail Stops, Stand-Offs, DIN Rail and Dust Covers
Item Appearance Use with Part No. Remarks
End Plates
BNH10W
BNE15W
BNH15MW
BNH15LW
BNH30W BNE30W
BNF10SW
BNE20BNF10NW
BNF10DW
BNH50W BNE50W
BN75W BNE75W
BN150W BNE150W
BNDH15W BNDE15W
DIN
Rail Stops
BNH10W
BNL5
(small)
1. DIN rail stops prevent side-to-side movement.
2. The BNL-5 width is 0.375” (9mm).
BNH15MW
BNH15LW
BNH30W
BNH50W
BNF10SW
BNF10NW
BNF10DW
BA111T
BA211T
BA311T
BA411S
BAF111SU
BAF111SDU
BN75W
BN150W
BNL6
(medium)
1. DIN rail stops prevent side-to-side movement.
2. The BNL-6 width is 0.375” (9mm).
3. To firmly stabilize these higher profile terminal blocks,
the BNL-6 has a higher profile than the BNL-5.
BNDH15W
BN200NW#
BN400NW#
BNL8
(large)
1. DIN rail stops prevent side-to-side movement.
2. The BNL-8 width is 0.571” (14.5mm).
3. # = number of poles.
DIN Rail
Stand-Offs
All series
BNS3 1.46” (37mm) height
BNS4 3.03” (77mm) height
DIN Rail
All series
BNDN1000
(length 39.37”
(1mm)
1. For calculating the rail lengths required, see the instruc-
tions on page 876.
2. The DIN rail material is aluminum.
Surface Mount
Bracket
BNDH15W
(dual-deck)
BNDL2 Used to surface mount dual-deck terminal blocks. (BNDL2).
Switches & Pilot LightsSignaling LightsRelays & SocketsTimersContactorsTerminal Blocks
Circuit Breakers
Accessories
Terminal Blocks
910
www.IDEC.com