Cut Sheet

BNH/BN
Terminal Blocks
902
www.IDEC.com
Switches & Pilot LightsSignaling LightsRelays & SocketsTimersContactorsTerminal BlocksCircuit Breakers
BNH/BN
Terminal Blocks
902
www.IDEC.com
Specifications, continued
Model BNH50W BN75W BN150W BNDH15W
Appearance
Width 0.610” (15.5mm) 0.787” (20mm) 1.024” (26mm) 0.315” (8mm)
Approvals UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV
No. of Poles 1 1 1 2
Wire Sizes 16 to 6 AWG 16 to 4 AWG 16 to 0 AWG 22 to 14 AWG
Voltage/Current 600V / 50A 600V / 75A 600V / 150A 600V / 10A
Terminals
Size M5 M6 M8 M3
Type Touch-down Hex bolt Hex bolt Touch-down
Mounting 35mm DIN rail 35mm DIN rail 35mm DIN rail 35mm DIN rail, surface
Terminal
Torque
(N-m) 2.6 - 3.7 3.9 - 5.4 10 - 13.5 0.6 - 1.0
(in-lbs.) 23.1 - 32.8 34.6 - 47.9 88.8 - 119.8 5.3 - 8.9
End Plate BNE50W BNE75W BNE150W BNDE15W
DIN Rail Stop BNL-5 BNL-6 BNL-6 BNL-8
Dust Cover BNC320 BNC420 BNC520
BNC230 (top level)
BNC240 (bottom Level)
Marking
Strip
PVC BNM7 BNM7 BNM7 BNM7
Fiberglass BNM9 BNM9 BNM9 BNM9
End clip BNM3 BNM3 BNM3 BNM3
Connecting Rods — — —
BNR1 10.34” (265mm)
BNR2 19.69” (500mm)
Connecting Nuts — — — BNN1 (2 pieces)
Base Mount Brackets — — — BNDL2
Ring Terminal Jumpers BNJ62 (2 pole) — — BNJ26
Fork Terminal Jumpers — — — BNJ26FW
1. BNDN1000 aluminum DIN rails are available in 1 meter lengths.
2. Marking strips are available in 1 meter lengths.
3. Most jumpers are six poles (except for BNJ62 which is 2 poles only).
4. Remove the “H” in the terminal block part number for standard screw type (ex. BNH50W becomes BN50W).