Cut Sheet

ManualsBrandsIDEC ManualsControl & AutomationDIN RAIL END CLIP,0.374

Switches & Pilot Lights Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers

901

800-262-IDEC (4332) • USA & Canada

BNH/BN

Terminal Blocks

BNH/BN Series

Key features:

• Touch-down terminals with spring-loaded captive screws

• Jumpers available up to 50A model

• Fuse block with or without blown-fuse indicator in neon or LED

• Mounts on 35mm standard DIN rail

UL Recognized

File No. E78117

CSA Certiﬁed

File No. LR64803

File No. R9551701

J9551516 (power blocks)

R9650688 (dual-deck blocks)

Speciﬁcations

Model BNH10W BNH15MW BNH15LW BNH30W

Appearance

Width 0.275” (7mm) 0.315” (8mm) 0.413” (10.5mm) 0.472” (12mm)

Approvals UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV

No. of Poles 1 1 1 1

Wire Sizes 22 to 16 AWG 22 to 14 AWG 22 to 14 AWG 18 to 10 AWG

Voltage/Current 600V / 10A 600V / 10A 600V / 15A 600V / 30A

Terminals

Size M3 M3 M3.5 M4

Type Touch-down Touch-down Touch-down Touch-down

Mounting 35mm DIN rail 35mm DIN rail 35mm DIN rail 35mm DIN rail

Terminal

Torque

(N-m) 0.6 - 1.0 0.6 - 1.0 1.0 - 1.3 1.4 - 2.0

(in-lbs.) 5.3 - 8.9 5.3 - 8.9 8.9 - 11.5 12.4 - 17.8

End Plate BNE15W BNE15W BNE15W BNE30W

DIN Rail Stop BNL-5 BNL-5 BNL-5 BNL-5

Dust Cover BNC230 BNC230 BNC230 BNC230

Marking

Strip

PVC BNM7 BNM7 BNM7 BNM7

Fiberglass BNM9 BNM9 BNM9 BNM9

End clip BNM3 BNM3 BNM3 BNM3

Ring Terminal Jumpers BNJ16 BNJ26W BNJ46 BNJ56

Fork Terminal Jumpers BNJ16F BNJ26FW BNJ46F BNJ56F

1. BNDN1000 aluminum DIN rails are available in 1 meter lengths.

2. Marking strips are sold in 1 meter lengths.

3. Most jumpers are provided with 6 poles (except for BNH50W jumper that is 2-poles only).

4. Remove the “H” in the terminal block part number for standard screw type (ex. BNH10W becomes BN10W).

Summary of content (13 pages)

PAGE 1
Terminal Blocks BNH/BN Key features: • • • • Signaling Lights UL Recognized File No. E78117 Touch-down terminals with spring-loaded captive screws Jumpers available up to 50A model Fuse block with or without blown-fuse indicator in neon or LED Mounts on 35mm standard DIN rail File No. R9551701 J9551516 (power blocks) R9650688 (dual-deck blocks) CSA Certified File No.
PAGE 2
Terminal Blocks Signaling Lights Switches & Pilot Lights BNH/BN Specifications, continued Model Width Approvals Relays & Sockets BN150W BNDH15W 0.610” (15.5mm) 0.787” (20mm) 1.024” (26mm) 0.315” (8mm) UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV No.
PAGE 3
Terminal Blocks BNF Fuse Blocks Model BNF10SW BNF10NW BNF10DW 0.591” (15mm) 0.591” (15mm) 0.591” (15mm) None Neon (100–300VAC) LED (24V DC) UL, CSA UL, CSA UL, CSA Switches & Pilot Lights Specifications, continued Appearance Blown Fuse Indicator Approvals No.
PAGE 4
Terminal Blocks Dimensions BNH Series Part No. BNH30W ø4.2 min. 6 max. 4.5 min. 18 15.5 13 When using C Rail: 50 ø5.2 min. 42.5 12.8 max. 34.3 28.3 6.5 max. 4.5 min. BN Series Part No. Diagrams BN75W 53 26 BN150W 22.5 20 17 ø8.5 min. 904 11 max. 10 min. 29 6 min. 22.8 max. 35 31.7 25.7 8.5 max. Diagrams BNF10SW/BNF10NW/BNF10DW BND15W 17.5 15 13 62 38 18 12 8 6.7 ø3.2 min. 5 min. www.IDEC.com 59.5 6.6 max. 5 max. 55.5 49.5 5.2 max.
PAGE 5
Terminal Blocks BN Power Blocks Switches & Pilot Lights BN Power Block Series Key features: • Up to 350A are available for DIN rail or direct mounting on panel surfaces • 2, 3, 4 pole models available CSA Certified File No. LR64803 Signaling Lights UL Recognized File No. E78117 File No.
PAGE 6
Terminal Blocks Dimensions Part No. Diagram I (between terminal screws: 46) 1.5 Switches & Pilot Lights BN Power Blocks BN200NW BN400NW A Dust Cover B E C D G H Relays & Sockets Signaling Lights F Part No. BN200NW BN400NW No. of poles Dim A Dim B Dim C Dim D Dim E Dim F Dim G Dim H Dim I 2-Pole 3.04” (78mm) 1.44” (37mm) 1.29” (33mm) 0.156” (4mm) Terminal stud M10 1.33” (34mm) 2.59” (66.5mm) 2.56” (65mm) 3.51” (90mm) 3-Pole 4.49” (115mm) 1.44” (37mm) 1.29” (33mm) 0.
PAGE 7
Terminal Blocks Switches & Pilot Lights Accessories Accessories Part Numbers: End Plates, DIN Rail Stops, Stand-Offs, DIN Rail and Dust Covers Item Appearance Use with Part No. Remarks BNH10W BNH15MW BNE15W BNH15LW BNH30W BNE30W Signaling Lights BNF10SW End Plates BNF10NW BNE20 BNF10DW BNH50W BNE50W BN75W BNE75W BN150W BNE150W BNDH15W BNDE15W BNH10W Relays & Sockets BNH15MW BNH15LW BNH30W BNH50W BNF10SW BNF10NW BNL5 (small) 1. DIN rail stops prevent side-to-side movement. 2.
PAGE 8
Terminal Blocks Accessories Switches & Pilot Lights Accessories, continued Part Numbers: Rods, Nuts, Marking Strips, Dust Covers, and Jumpers Item Appearance Use with Part No. Remarks BNDH15W BNH10W BNH15MW BNC230 BNH15LW Marking Strip Fastener BN75W BNC420 BN150W BNC520 BN200 BAC820 BN400 BNC1000 The overall length is 39.37” (1,000mm). The material is polycarbonate (UL94-V2). BNM7 Material: polyvinyl chloride (PVC) Strip dimensions are 0.37”x39” (9.5 x 1,000mm).
PAGE 9
Terminal Blocks Dimensions Dimensions: DIN Rail Part No. Diagrams BNDN1000 Dimensions: Jumpers BNH Series Diagrams BNJ26W Insulation le ho Contactors BNJ62 Circuit Breakers Terminal Blocks Thickness + 0.8mm (0.0315”) www.IDEC.com 1.4 4.5 0.8 2 11 2 Insulation 1.7 0.8 Insulation 4.2 9.3 12 60 (6-pole) .1 R2 1.4 0.8 1.7 1.4 6 Insulation BNJ62 912 12 .2 9.3 0.8 40 (6-pole) 3.7 BNJ56W (fork) 60 (6-pole) ø4 1.4 8 R1 6.4 .8 5 Insulation BNJ56 52.5 (6-pole) 2.8 10.
PAGE 10
Terminal Blocks Accessories Switches & Pilot Lights Dimensions, continued Dimensions, DIN Rail Stops and Stand-offs Part No. Dimensions BNL-6 45 Signaling Lights 9 BNL-6 shown, BNL-5 same except without back crossbar 46 Relays & Sockets BNL-8 14.4 30 BNDL2 26 Timers 38 13 36.7 30 2-ø5.2 12.5 BNS3 54 26 15 25° 15 28 Contactors 2.6 2-M5 12.5 BNS3 76.7 2-ø5.2 12.5 54 15 2-M5 28 15 2.6 BNS4 30 26 25° Terminal Blocks 12.
PAGE 11
Terminal Blocks Signaling Lights Switches & Pilot Lights Accessories Dimensions, continued Dimensions: End Plates Part No. Dimensions Part No. Dimensions 38 53 BNE75W BNE15W 5 5 74 Relays & Sockets 63 BNE20 BNE150W Timers 5 3 62 Contactors 38 BNE30W BNDE15W Terminal Blocks 5 48 Circuit Breakers BNE50W 5 914 www.IDEC.
PAGE 12
Terminal Blocks Instructions Switches & Pilot Lights Instructions Wiring Touch-Down Terminal Blocks: BNH Series Instructions Step 1 Step 2 Step 3 Step 4 Signaling Lights Step 1. Insert the wire (or crimping terminal) into the terminal block with the terminal screws in the open position. (Use of crimping terminals is optional.) Step 2. Push the terminal screw down to hold the wire in place. Step 3. Hold the terminal screw down, and tighten with a screwdriver. Step 4.
PAGE 13
Terminal Blocks Signaling Lights Switches & Pilot Lights Instructions Calculating DIN Rail Lengths Instructions Appearance BN150W BNE150W BN100W BNT20 BNF10S BN75W BN50W (BNH50W) BNE20 BN40W (BNH40W) Step 1. Add widths of all terminal blocks (reference pages 864 through 869). Step 2. Add the endplate thickness (usually only one). Step 3. Add the DIN rail stop widths (usually two are used). Step 4. Round to the nearest 2” (50mm) increment to allow for DIN rail hole spacing. Step 5.