Datasheet

Download catalogs and CAD from http://asia.idec.com/downloads
B-148
ø16 A6 Series Miniature Switches and Pilot Lights
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Switches & Pilot Lights
Flush Silhouette
ø16
ø22
ø30
Miniature
Pilot Lights
LB
A6
www.apem-idec.eu
Light duty in short 22mm body length.
LED Lamp Ratings (LATD)
Part No.
LATD-5➁ LATD-1➁ LATD-2➁
Lamp Base Exclusive for A series control units
Voltage Range 5V DC ±5% 12V AC/DC ±10% 24V AC/DC ±10%
Rated Voltage 5V DC 12V AC/DC 24V AC/DC
Current Draw
AC — 9 mA 9 mA
DC 8 mA 8 mA 8 mA
Color Code ➁
A (amber), G (green), JW (pure white), R (red), S (blue)
Lamp Base Color Same as illumination color (except JW - gray base)
Voltage Marking Die stamped on the base
Life (reference value) Approx. 50,000 hours (The luminance is reduced to 50% of the initial intensity when used on complete DC.)
Internal Circuit
(+) (–)
LED Chip
Protection Diod
e
Zener Diode
• Specify a color code in place of ➁ in the Part No.
A (amber), G (green), JW (pure white), R (red), S (blue)
• Use a pure white (JW) LED lamp for yellow illumination.
Contact Ratings (Contact Block)
Rated Insulation Voltage 250V
Rated Thermal Current 3A
Operating Voltage (AC/DC) 12V 24V 110V 220V
AC 50/60 Hz
Resistive Load — — 1.0A 0.5A
Inductive Load — — 0.7A 0.5A
DC
Resistive Load 1.0A 1.0A 0.2A —
Inductive Load 0.7A 0.7A 0.5A —
Contact Material Silver with gold contact
• Minimum applicable load: 5V AC/DC, 1 mA
(applicable range may vary with operating conditions and load types)
Weight (example)
Weight (approx.)
AL6M-M24: 8g
AL6M-M221: 46g
AL6M-P4: 6g
AL6M-P21: 45g
AB6M-M2: 7g
AS6M-2Y2: 9g
AS6M-2KT2A: 21g
Specifications
Operating Temperature –25 to +55°C (no freezing)
Storage Temperature –30 to +80°C (no freezing)
Operating Humidity 45 to 85% RH (no condensation)
Contact Resistance 50 mΩ maximum (initial value)
Insulation Resistance 100 MΩ minimum (500V DC megger)
Dielectric
Strength
Switch Unit
Between live and dead metal parts: 2,000V AC, 1 minute
Between terminals of different poles: 2,000V AC, 1 minute
Between terminals of the same pole: 1,000V AC, 1 minute
Between contact and lamp terminals: 1,500V AC, 1 minute
Illumination
Unit
Between live part and ground: 2,000V AC, 1 minute
Vibration Resistance
Operating extremes: 5 to 55 Hz, amplitude 0.75 mm
Shock Resistance
Damage limits: 500 m/s
2
(50G)
Operating extremes: 200 m/s
2
(20G)
Mechanical Durability
(minimum operations)
Momentary: 1,000,000 operations
Maintained: 100,000 operations
Pushlock Turn Reset : 100,000 operations
Selector Switch: 250,000 operations
Key Selector Switch: 250,000 operations
Electrical Durability
(minimum operations)
Other than Maintained : 100,000 operations
Maintained: 50,000 operations
(Switching frequency 1200 operations/h)
Degree of Protection IP40, IP65 (IEC 60529)
Terminal Style Solder terminal
Specications and Ratings