Datasheet

For more information, visit http://asia.idec.com
B-163
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Switches & Pilot Lights
Flush Silhouette
ø16
ø22
ø30
Miniature
Pilot Lights
LB
A6
ø16 A6 Series Miniature Switches and Pilot Lights
www.apem-idec.eu
Grip Style Enabling Switch Housing
The following switches can be installed on the grip style enabling switch
housing to be used as hand-held switches.
• AB6M pushbuttons (IP65, except for AB6M-V)
• AS6M selector switches (IP65)
• AS6M key selector switches (IP65)
Note: Illuminated pushbuttons and pilot lights cannot be used. When using HE9Z-
GSH51, be sure to used IP65 switches.
Part No. Ordering No. Package Quantity
HE9Z-GSH51 HE9Z-GSH51 1
Specications
Applicable Standards IEC/EN 60529
Operating Temperature –25 to 60°C (no freezing)
Relative Humidity 45 to 85% RH (no condensation)
Storage Temperature –40 to 80°C (no freezing)
Pollution Degree 3
Shock Resistance Damage limits: 500 m/s
2
Vibration Resistance Damage limits: 5 to 55 Hz, amplitude 0.5 mm
Electric Shock Protection Class
Class II (when using HE5B-M2P*)
Applicable Cable Outside diameter ø4.5 to 10 mm
Conduit Port Size
M16 (cable gland is supplied with the grip style
enabling switch housing)
Degree of Protection
IP65 (with HE5B-M2P*)
NEMA type 4X indoor use only
(with HE5B-M2P*)
Weight (approx.) 65g (grip style enabling switch housing only)
• The above specications are for the grip style enabling switch housing only.
Notes:
• The HE9Z-GSH51 grip style enabling switch housing does not
include the HE5B enabling switch. The enabling switch must be
ordered separately.
• The HE5B enabling switch must be installed and wired to the
HE9Z-GSH51 grip style enabling switch housing by the user. For
infor mation on wiring, see the instruction sheet supplied with
the HE9Z-GSH51.
Dimensions
92
(
78
)
38
144
Cable Gland
Part No. SKINTOP BS-M16 =
1.5 (LAPP)
39
HE5B Enabling Switch
(ordered separately)
HE9Z-GSH51
HE9Z-GSH51 + HE5B Construction
HE5B Enabling Switch (not supplied with the grip style enabling switch housing)
Locking Ring
Head
Housing
Cable Gland
• Anti-rotation ring is not required when installing the HE5B enabling switch on the HE9Z-GSH51 grip style enabling
switch housing. Use the locking ring only.
Mounting Bracket
50
20
33
81
Material:
SUS304
Thickness:
3.0 mm
2-ø5.3
(For M5 mounting screws)
86
Plastic Coating
Part No: HE9Z-GH1
All dimensions in mm.
Grip Switch Housing