Instructions / Assembly

(4) Repeat the previous step for
the 2
nd
leg. But DO NOT insert
the last leg.
(5) Before inserting the last leg,
take the center ring (face down)
and insert the tabs in the slots of
each of the legs.
(6) Then snap the last leg into
the center ring tab and in the slot
of the seat.
(7) Turn the item over so it
stands on its 3 legs. Press down
firmly on each connection point
where the center ring connects
to each leg to ensure they are
properly installed and both the
center ring and the leg holes line
up.
(8) Insert a pin
through each leg into
the center ring. Ensure
the pins snap into
place in the center
ring.