Product Manual

8
TP10KAC-DX
July 2017
1. PRODUCT INFORMATION
1.1 Product Description
The TP10KAC-DX 2-post hydraulic lift is a surface mounted, frame contact lift incorporating the latest safety
technologies. Designed and manufactured for a lifting capacity of 10,000 lbs. (Max 2,500 lbs. per Lifting Arm)
and is fully capable for lifting vehicles, vans and light trucks by safely holding them in an elevated position.
The TP10KC-DX also incorporates the Bi-Symmetric feature, which allows the Arms to be configured for both
asymmetrical & symmetrical lifting configurations.
The TP10KC-DX 2-post hydraulic lift
consists of a fixed structural unit
(Crossbeam and Columns), the mobile
units (Carriages and Lift Arms), and the
Hydraulic Power System and Safety
devices.
A. Crossbeam
B. Column
C. Carriage
D. Lifting Arm
E. Power Unit
F. Overhead Safety Shut-Off Bar
G. Single Point Safety-Latch
Release
1.2 Technical Data
Capacity
10,000 lbs. (Max 2,500 lbs. per Arm)
Height Overall
144”
Width Overall w/ Power Unit
145-1/2”
Max Lifting Height
71”
Max Lifting Height w/ Tallest Adaptor
76-1/2”
Width Between Columns
116”
Min Pad Height
4”
Drive Thru Clearance
104”
Front Arm Reach – Min / Max
23” – 45”
Rear Arm Reach – Min / Max
41” – 57”
Electrical Power
220V, 20 Amp, 1 Phase
Max Hydraulic Pressure
3,050 PSI