Full Product Manual

iDEAL Paint Mixing Room (PSB-PMR1088-AK)

NOTE: Refer to exploded view drawings included with your spray booth for installation details.

Basic Installation:

1. Determine where booth will be constructed (determine where exhaust stack will exit through the roof) and

where Door will be placed.

2. Use chalk lines to place booth layout on the floor.

3. Layout all floor channels for exhaust chamber and walls. As you attach wall panels together, they will also bolt

to the floor channel.

4. Starting with exhaust chamber at the rear, bolt one corner panel and one rear wall corner panel together.

5. Bolt opposite rear sidewall panel to rear wall panel.

6. Bolt all rear wall panels in place. (Note: #8 panel ends fit between #1 & #5 rear wall panels.)

7. Bolt tie channel along top edge of rear wall panels.

8. Place exhaust fan panel on top of the exhaust chamber wall panels and bolt in place.