Instructions / Assembly

iDEAL Paint Spray Booth (PSB-SDD26B-AK)
33
5.1 MAINTENANCE INTERVAL CART
* Adjust belt tension after first week of operation, then every six months thereafter.
5.2 DAILY
5.2.1 Inspect Filters
Visually inspect all filters for damage and debris buildup. Replace damaged or clogged filters.
5.2.2 Filter Maintenance
Wear personal protective equipment to protect against dry paint and dust particles while handling filters.
Check manometer gauge daily for condition of filters. Do not change filter based on its appearance.
Filters are not necessarily changed at equal time intervals. The usable life of a filter is related to:
• Filter material weave.
• Paint sprayed.
• Distance from gun to filter.
• Paint gun type.
• Amount of thinner used.
• Spray pressure.
5.2.3 Determine Filter Condition
1. The filter condition is acceptable when the manometer tube scale is between the two arrows.
2. When manometer scale exceeds red pointer flag, filters must be changed.
3. If a different filter media is to be used, manometer setup procedure must be done again.