Instructions / Assembly

iDEAL Paint Spray Booth (PSB-SDD26B-AK)

4.12 PRODUCT DOORS

Before installing door, verify both door frame channels and top door frame stop are installed properly and squared.

Verify dimension between frame channels and floor to door stop with door drawing.

Install Left or Right Single Door

1. Place door in door frame on right or left side. Place spacers between door and floor. Door is

manufactured to have a 1-1/2” clearance at bottom, 1/2” clearance on top and 1/2” clearance on sides.

2. Bolt hinges in place on door using pre-tapped holes (place on left edge of door for left mounting and on

right edge of door for right mounting). Do not tighten screws at this time.

3. Adjust the door in all directions using spacers. Drill holes in hinge flanges using the hinges already on the

door as templates. Place bolts and nuts through hinges and holes in mounting flange and tighten.

4. Remove spacers and check door for proper function. Adjust as needed.

Install Left or Bi-Fold Door

1. Join the two doors by bolting hinges on opposing edges of doors when they are laid flat on the floor

using bolts in the pre-tapped holes.

2. Place doors in door frame on right or left side. Place spacers between doors and floor. Door is

manufactured to have a 1-1/2” clearance at bottom, 1/2” clearance on top and 1/2” clearance on sides.

3. Bolt hinges in place on door using pre-tapped holes (place on left edge of door for left mounting and on

right edge of door for right mounting). Do not tighten screws at this time.

KD-01K

Triangle Gusset

Plate(KD-01K-004)

KD-01K

KD-01M

Door Handle

Tri-Fold Door

Hinge

Metal Anchor Tabs

(KD-01K-008)