Instructions / Assembly

iDEAL Paint Spray Booth (PSB-SDD26B-AK)

5. Wherever the red fluid stops is where you will place the green arrow. In this example, the red fluid stopped at

.25 inches of water column. So, because we know our filters are rated for .5 inches of water column, and we

know that with clean filters the fan is drawing .25 inches of water column, we simply add the two numbers

together to tell us where the filters will pack out.

Note: 25 inches of water + .5 inches of water = .75 inches of water total

6. Now that baseline is set, measure up the scale .5 inches of water. That is where you will place the red arrow.

At this point, your manometer is set up and ready to use. You should never need to move the arrows once they

are placed. Always check the manometer before turning the fan on to ensure the red fluid is sitting on the 0

mark. If the fluid is not on 0, turn “Zero Set” knob to adjust fluid to zero before starting fan.