Instructions / Assembly

iDEAL Paint Spray Booth (PSB-SDD26B-AK)

4.6 MANOMETER

Located manometer on booth where it can easily be read daily by the paint department. Install close to exhaust filter

wall to keep tubing length to a minimum. Excess tubing length will reduce accuracy of the manometer. The high port will

connect to work chamber, and the low port will connect to chamber on the suction side of the filter grid.

1. Drill a hole in booth wall just large enough for the plastic hose barb to fit through (approx. 13/32). Installwasher

and nut on back side. Do not over tighten.

2. Mount manometer on booth wall and ensure it is level using bubble level on manometer. Manometer must be

level, or it will not be accurate.