Instructions / Assembly

iDEAL Paint Spray Booth (PSB-SDD26B-AK)
19
STANDARD LIGHTS
1. Install top and bottom guide angle pieces (KP02-002) above and below the light opening hole per drawing. Insert
bolts through wall panel hole and then through the guide angle flange and secure with nut.
2. Place a 1/4” to 1/2“ bead of caulk around the edge of the light hole in the panel.
3. Place the tempered glass centered between the two guide angle pieces pressing it into the bead of caulk
forming a seal.
4. Install the two end guide angle flanges (KP02L01-A & KP02-R01-A) per drawing. Insert bolts through wall panel
hole and secure with nut.
5. Place light fixture between the end guide angle flanges. Use #12 drill screws to hold fixture per drawing.
KP02-002
KP02-R01-A
KP02-L01-A
KP02-002
Light Fixture
KP02