Installation Guide

iDEAL Paint Spray Booth (PSB-AFCF23ASY)

4.15 FRONT DOOR LIMIT SWITCH & LATCH INSTALLATION

Limit Switch Installation:

1. Bolt Limit Switch to Header Connection Panel (CF-15A) as per diagram below. Connect with 10-24 x 2"

Screws & Nylon Nuts.

(NOTE: 1/4” mounting holes must be drilled into Header Panel to connect Limit Switch)

2. Adjust actuating Lever Arm so Striker Bracket will actuate switch.

3. Attach Striker Bracket (KD-01K-010) to Door with #12 drill screws in front of Limit Switch Lever Arm.

4. Make final adjustments to Lever Arm to assure proper operation, then tighten set screw on Limit Switch

Lever Arm.

Door Latch Installation:

1. Attach only the upper Latch to Header Connection Panel (CF-15A) using 1/4"-20 x 1.25" Hex Cap Screws &

Serrated Flange Nuts. Use provided 3/8” Shim Plate behind upper Latch for proper flush alignment to Door.

(NOTE: 1/4” mounting holes must be drilled into Header Panel to connect Limit Switch)

2. Use #14 drill screws to connect the lower Door Latch to Door, ensuring the alignment and spacing is correct.