Installation Guide

iDEAL Paint Spray Booth (PSB-AFCF23ASY)

4.13 SIDE ACCESS DOOR LIMIT SWITCH INSTALLATION

1. Bolt Limit Switch to Limit Switch Mounting Bracket (CF-29) with 10-24 x 2" Screws & Nylon Nuts.

(NOTE: 1/4” mounting holes must be drilled into Mount Bracket to connect Limit Switch)

2. Remove bolt in panel above access door on latch side and bolt the Limit Switch Mounting Bracket in place.

3. Adjust actuating Lever Arm so Striker Bracket will actuate switch.

4. Attach Striker Bracket (KD-01K-010) to Door with #12 drill screws in front of Limit Switch Lever Arm.

5. Make final adjustments to Lever Arm to assure proper operation, then tighten set screw on Limit Switch

Lever Arm.

4.14 SIDE ACCESS DOOR LATCH INSTALLATION

1. Unbolt the two bolts that connect panel and door frame, approx. 42” from floor.

2. Insert Door Latch Bracket (CF-28) into panel flange & reinsert bolts & tighten.

3. Use #14 drill screws to connect Door Latches to Door & Latch Bracket, ensuring the alignment and spacing is

correct.