Installation Guide

iDEAL Paint Spray Booth (PSB-AFCF23ASY)
12
10. Following exploded view drawings, continue alternately assembling wall panels and roof panels to each other
until you reach front end of booth.
11. Verify walls are plumb and booth is square and on floor layout marks. Tighten all mounting hardware.
12. Anchor floor channel to floor at a minimum of every 12 inches.
13. Caulk all panel joints inside the booth with the acrylic latex caulk provided. Do not use a silicone caulk.
14. Apply foam gasket to perimeter of all door openings.
• Thick 5/8” foam gasket is to be applied for Front Doors
• Thin 3/8” foam gasket is to be applied for Side Door
15. Attach Door hardware to Front & Side Doors. (Details noted in Drawings & sections 4.12 to 4.16)
Front Doors
Side Door