User Guide

PEAK Hold Measurements

Function Range Accuracy Function Range Accuracy

DC 400mV unspecified AC 400mV unspecified

Voltage Voltage

4V +

(1.5% +300) 4V +(1.5% +300)

40V +

(1.5% +60) 40V +(1.5% +60)

400V 400V

1000V 750V

DC 40mA +

(3% +60) AC 40mA +(3% +60)

Current Current

400mA 400mA

10A +

(1.5% +60) 10A +(1.5% +60)

Note: With zero calibrated before measurement

4V ranges specify readings above 10% of full scale

Current ranges specify reading <90% of full scale

Noise generating fields may affect intervals

MIN/MAX

~Hz PEAK

HOLD

Data Acquisition

Continuity Check

To Verify Continuity:

1. A continuity test ensures that all circuit connections are

intact.

2. Plug the Black test lead into the COM port and the Red

test lead into the Ω port.

3. Set the rotary switch to the Ω position.

4. Press the blue button until is shown in the display.

5. Connect the test leads to the circuit to be measured. The

buzzer will sound if the resistance of the circuit measured

is lower than 30Ω.

MIN/MAX

~Hz PEAK

HOLD

Data Acquisition

Circuit Connection: