User Guide

23
Lifetime Limited Warranty
This meter is warranted to the original purchaser against defects in
material or workmanship for the lifetime of the meter. During this
warranty period, IDEAL INDUSTRIES, INC. will, at its option,
replace or repair the defective unit, subject to verification of the
defect or malfunction.
This warranty does not apply to defects resulting from abuse,
neglect, accident, unauthorized repair, alteration, or unreasonable
use of the instrument.
Any implied warranties arising out of the sale of an IDEAL product,
including but not limited to implied warranties of merchantability
and fitness for a particular purpose, are limited to the above. The
manufacturer shall not be liable for loss of use of the instrument or
other incidental or consequential damages, expenses, or economic
loss, or for any claim or claims for such damage, expenses or eco-
nomic loss.
State laws vary, so the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
IDEAL INDUSTRIES, INC.
Sycamore, IL 60178, U.S.A.
800-304-3578 Customer Assistance
www.testersandmeters.com
ND 2385-1 Made in Taiwan
Maintenance
Battery Installation or Replacement:
The #61-492 is powered by 2 1.5 volt batteries.
1. Remove the test leads from the front terminals and turn the
meter off.
2. Remove the screw from the battery cover and lift to
remove.
3. Replace batteries.
4. Make sure the battery box leads do not become pinched
between the case and battery cover before replacing the
battery cover and screw.
Fuse Replacement
1. Remove the test leads from the front terminals and turn the
meter off.
2. Remove the screw from the battery cover and lift to
remove.
3. Remove the battery.
4. Remove the two screws connecting the top and bottom
cases of the meter.
5. Remove the defective fuse by gently prying one end of the
fuse loose and sliding the fuse out of the fuse holder.
6. Install a new fuse of the same size and rating.
7. Make sure the fuse is centered in the fuse holder
8. Reconnect the top and bottom case.
9. Re-install the battery and battery cover.
Warning
To avoid electrical shock, remove test lead before opening the
cover. Repairs or servicing not covered in this manual should
only be performed by qualified personnel.