User Guide

16
Files Menu
Up to 1 Meg of data can be stored in the memory of the
61-805. Once full, the power analyzer will cease recording new data, and the display shows: “MEMORY FULL.” Old
data will not be overwritten.
DIR (Directory)
This sub menu selection displays a directory of all files saved in memory.
61-805 - DIR
STD-PROG. 61-805 xxxxx bytes File name/File size
dd / mm / yy hh : mm : ss Day / Time
TEST1. A5T xxxxx bytes
dd / mm / yy hh : mm : ss
STD-PROG. A5T xxxxx bytes
dd / mm / yy hh : mm : ss
...... / .............
Free bytes: xxxxxxxxxx Number of free bytes in memory
• The [ ] or [ ] keys scroll up and down through the files in case that all files stored by the power analyzer cannot
be shown in only one screen.
• Press [ENTER] or [ESC] to exit.
Delete
From this submenu, any file can be deleted from the internal memory.
61-805 – DELETE
STD-PROG. A5M xxxxx bytes File name / File size
TEST1. A5T xxxxx bytes
STD-PROG. A5T xxxxx bytes
...... ............
• With the arrow keys, [ ] & [ ], select the file to be deleted.
• Press [ENTER] to confirm selected file erasing. A confirmation is required.
• Press [ESC] to exit without deleting a file.
Format
This submenu formats the internal memory of the 61-805.
61-805 – FORMAT
15
Options Submenu
Within the options submenu, you can set up the parameters to be visualized on the screens, and the display
contrast.
Measure
• Set up the parameters to be visualized on display in the bar graph and expanded view screen
Bar Graph
• Select the measurement parameter to be viewed on the bar graph.
• Scroll through the options with the up and down keys, [ ] or [ ].
• Press [ENTER] to validate selection or [ESC] to exit with no modification.
• Set the scale by selecting the zero scale and full scale measurement values
Expand
To choose three instantaneous parameters to be bigger-size displayed for a clearer reading.
• Select three measurement parameters to be viewed on the expanded view screen.
• Scroll through the table of options with the up and down keys, [ ] or [ ].
• Press [ENTER] to validate selection or [ESC] to exit with no modification.
Volt
This submenu permits the user to select the voltage readout in the main visualization screen. It can correspond to the
voltage between phases (Vp-p) or between phase and neutral (Vp-n).
• Select with the up and down arrow keys [ ] or [ ].
• Press [ENTER] to validate the choice or [ESC] to exit with no modification.
Options Submenu
Within this submenu, the contrast of the 61-805 display can be modified.
• Press the [ ] to intensify the display contrast and [ ] to lower the screen contrast.
LOW HIGH %
Run Menu
The data collection and logging action of the power analyzer can be enabled or disabled from the run menu.
• Press [ ] or [ ] keys to RUN or STOP data collection.
• Press [ENTER] to validate or [ESC] to exit with no modification.
OPTIONS
MEASURE
VOLT
Bar graphs, expanded param (3 parameters)
Vphase-phase or Vphase-neutral
(Vp-p or Vp-n)
▲
▲
▲
▲
▲
▲
▲
▲
CONTRAST
➔
➔
RUN
Run / Stop
▲
▲
☞
☞
▲
▲
☞
▲
▲