User Guide

109
DC Current
Range Resolution Max Accuracy Voltage
Display Burden
30mA 10µA 30.00 ±(1.5% +2) 200Vmax
300mA 0.1mA 300.0 ±(1.5% +2) 2Vmax
10A 10mA 10.00 ±(2.0% +2) 2V max
Overload Protection: 1A (500V) fast blow fuse for mA input
10A (500V) fast blow fuse for A input
To Measure DC Current:
1. Plug the black test lead into the COM port and the red test
lead into the mA or A port.
2. Set the rotary switch to the mA or A position.
3. Push the blue button until
DC is shown on the display.
4. Connect the meter in series with the load or circuit.
5. Measure DC Current.
Frequency/RPM
Range Resolution Max Sensitivity Accuracy
Display
3kHz/30kRPM 1Hz/30RPM 3.000/30.00 100mV* Frequency:
30kHz/300kRPM 10Hz/300RPM 30.00/300.0 0.01%±1
300kHz/3MRPM 100Hz/3KRPM 300.0/3.000
3MHz/30MRPM 1kHz/30KRPM 3.000/30.00 RPM:
30MHz/300MRPM 10kHz/300KRPM 30.00/300.0 250mV 0.01% ±10
*Less than 50Hz the sensitivity is 1.5V.
To Measure Frequency:
1. Plug the black test lead into the COM port and the red test
lead into the VΩHz port.
2. Set the rotary switch to the HZ RPM position.
3. For RPM, Push the blue button until RPM is shown on
the display.
4. Connect the meter in parallel with the load or circuit.
5. Measure Frequency or RPM.
APO RPM
Hz
APO RPM
Hz
Circuit Connection:
Circuit Connection: