User Guide

87
DC Volts
Range Resolution Max Display Accuracy
300mV 100µV 300.0 ±(0.25% +1)*
3V 1mV 3.000
30V 10mV 30.00
300V 100mV 300.0
750V 1V 750
Input Impedance: 10MΩ (over 1000MΩ in 300 mV range)
±(0.4% reading +1 digit) in 3V range
To Measure DC Voltage:
1. Plug the black test lead into the COM port and the red test
lead into the VΩHz port.
2. Set the rotary switch to the V position.
3. Push the blue button until DC is shown on the display.
4. Connect the meter in parallel with the load or circuit.
5. Measure DC Voltage.
AC Current
Range Resolution Max Accuracy Voltage
Display Burden
30mA 10µA 30.00 ±(2.0% +5)* 200V max
300mA 0.1mA 300.0 2Vmax
10A 10mA 10.00 ±(2.5% +5)* 2V max
AC Conversion Type: Average Sensing rms indication
40Hz ~ 1kHz
Overload Protection: 1A (500V) fast blow fuse for mA input
10A (500V) fast blow fuse for A input
To Measure True RMS AC Current:
1. Plug the black test lead into the COM port and the red test
lead into the mA or A port.
2. Set the rotary switch to the mA or A position.
3. Push the blue button until AC is shown on the display.
4. Connect the meter in series with the load or circuit.
5. Measure AC Current.
APO RPM
Hz
APO RPM
Hz
˜
Circuit Connection:
Circuit Connection: