User Manual
11
CLEANING AND MAINTENANCE
Allow the unit to cool down completely before cleaning.
Do not immerse the kettle in water while washing up.
The outside of the kettle may be wiped over with adamp cloth and washing-up liquid.
Water stains inside the kettle can be removed by rubbing with acloth moisten with white
vinegar; rinse the inside with water afterwards.
Limescale should be removed in the following way:
Fill the kettle with 0.5 litre of water and bring it to boil.
Switch the kettle o and disconnect the kettle from the power supply.
Pour 0.1 litre of white vinegar into the kettle.
Allow to stand overnight.
Discard the solution and rinse the inside with water.
Fill the kettle with 1 litre of water and bring to boil.
Discard the water and rinse the inside with water.
If the scale is persistent, the cleaning should be done in the following way:
- ll the kettle with 0.5 litre of white vinegar.
Bring the vinegar to boil and leave the hot solution inside the kettle for about 30
minutes.
Bring the vinegar to boil again.
Discard the vinegar and rinse the inside with water.
Fill the kettle with 1.0 litre of water and bring it to boil.
Discard the water and rinse the inside with water.
No timely removal of the scale from the heating element results in the heating element’s
quicker wear.
Any damage resulting from applying harsh descalling products available in the market are
not covered by the producer’s warranty.
If the power cord is damaged, it can be replaced only by an especially constructed one
(with appropriate plugs and endings).