User Guide

22
Continuity Check
To Verify Continuity:
A continuity test ensures that all circuit connections are intact.
1. Plug the Black test lead into the COM port and the Red test
lead into the VΩ port.
2. Set the rotary switch to the position.
3. Press the blue button until Ω is shown in the display.
4. Connect the test leads to the circuit to be measured. The
buzzer will sound if the resistance of the circuit measured is
lower than 50Ω.
Continuity threshold: Approx. 50Ω
Continuity Indicator: 2kHz tone buzzer
Input protection: 600V rms
ND 2352-1 61-633 630 Series Ins 12/22/04 9:49 AM Page 22