User Manual

Page 22
Maintenance
Cleanthecasewithadampclothandmilddetergent.Donotuseabrasivesorsolvents.
Keepawayfromliquidsandensurethetraceriscompletelydrybeforeuse.
Service and Replacement Parts
Thisunithasnouser-serviceablepartsexceptforthefuseinthetransmitter.For
replacementpartsortoinquireaboutservice,contactIDEALTechnicalSupportat
877-201-9005orvisitourwebsite,www.idealindustries.com.
Specifications:
Transmitter
OperatingFrequency: 32.768kHz,fixed-amplitude,time-modulatedsignal
CurrentOutputofSignal: 82mArmsto50Ohms
VoltageOutputofSignal: 4Vrms(330mW)
OperatingVoltage: 0–600VAC/DC
Fuse: 1A/660V,Super-quick-actingFF(6mmx32mm)–
  IDEAL#F-956
BatteryPower: 1.5Vx(4)AAbatteries(NEDA15A,IECLR6)
Batterylife: 25hoursopencircuittesting/6hoursshortcircuittracing.
Indicators: On/Off,Lineenergized,Lowbattery
Receiver
Sensing:  Magnetic
Signalresponse: NumericdisplayandAudiblebeep
BatteryPower: 1.5Vx(3)AAbatteries(NEDA15A,IECLR6)
Batterylife:  20hoursminimum
InductiveClampwithBatteryPack
OperatingFrequency: 32.768kHz,fixed-amplitude,time-modulatedsignal
CurrentOutputofSignal: 200mAp-pmaxinto50ohms
VoltageOutputofSignal: 30Vnominal(2watts)
OperatingVoltage: 0–600VAC/DC
BatteryPower: 1.5Vx(8)C-cellbatteries(NEDA14A,IECLR14)
Batterylife:  30hours.