Instructions / Assembly

11
Using the Store Function
Store/Recall button:
The screen will be flashing the MEM symbol and the number of the
stored data twice when the Store/Recall button is pressed.
1. Press once to store the voltage value during voltage test
2. Press once to store the PI/ DAR, insulation or Earth-bond
resistance value when the individual test is completed.
3. The memory is divided into five segments, each segment has
100 maximum data points. The method to store the data is first
in/first out when the memory is full.
Table: The stored values of the individual test
segments
Voltage
Earth-Bond
resistance
Insulation
resistance
50~1000V
DAR PI
items
1 Voltage Resistance Resistance DAR value PI value
2 Leakage
Current
R30-sec R1-min
3 Test voltage R1-min R10-min
Using the Recall Function
Press the Store/Recall button > 2 sec to enter the RECALL mode.
If the memory is empty, the meter will display the “ nOnE ” symbol.
Search the stored value under RECALL mode
Note: Press the Store/Recall button > 5 sec to clear the stored data.
The screen will be flashing MEM symbol and “cLr” on reading twice.