Instructions / Assembly

Functions Indication Table
Function Description
Power On Steady Green light in Tip,
2 Short Beeps
Power Off No Light, Long Beep
Tester Auto Power Off Green Light Flashes, 1 Beep
Red LED 50-1000V AC Range
Blue LED 12-1000V AC Range
Audible OFF One Beep
Audible ON Two Beeps
Flashlight Button Flashlight On or Off
Electrical Specifications
Function Range
AC Voltage Sensing High Mode 50V AC to 1000V AC
AC Voltage Sensing Low Mode (61-657 Only) 12V AC to 1000V AC
Frequency 50Hz or 60Hz
Environmental Specifications
Operating Temperature: 32ºF to 104ºF (0ºC to 40ºC) (<80%RH)
Operating Altitude:
6500 ft (2000 m)
Storage Temperature:
14ºF to 122ºF (-10ºC to 50ºC) (<80%RH)
15
Mechanical Specifications
Dimensions: (L x W x H) 6.4 in. x 1.0 in. x 1.2 in.
(166 mm x 26.3 mm x 31 mm)
Weight: 0.16 LBS (0.08 KG)
Power Source: (2) 1.5V AAA Batteries
Ingress Protection Rating: IP67 dust and water resistant
Flashlight: >500LUX @ 4.0 in
EMC/EMI
CISPR 22 3rd Edition. Class B Limits.
EN 55032
CISPR 32
CISPR 11
FCC 15. 107 with reference to Section 15.109 (g).
ICES-003
EN 61326-2-2 Sec 6.4.2.101
USA (FCC)
47 CFR 15 subpart B. This product is considered an exempt device per clause
15.103.
Safety
Complies with the following:
IEC 61010-1, Edition 3 (2010-06) +AMD1 (2016-12)
ANSI/UL/IEC EN 61010-1, Edition 3 (2016-04-29)
CSA-C22.2 No. 61010-1-12 Edition 3 (2019-07-19)
IEC 60529
Overvoltage CAT IV 1000V.
Any voltages exceeding the defined maximum voltage measurement categories
described above are outside the normal use of the equipment and protection cannot
be guaranteed.
Pollution Degree Class 2