Full Product Manual

Document: September1, 2009 Page 2of 10
Table 1, General specifications
Display OLED Graphics Display
Operating Range 108 to 264VAC
Voltage RMS 85 to 132VAC (61-165),
85 to 265 (61-164)
Ohms Function 0.00  to 299 
Percentage of Voltage Drop 0.1% to 50.0%
Voltage Drop 0.1V to 50.0V
Ground to Neutral Voltage 0.0V to 24.0V
GFCI current Calculated E/R ( R is a fixed internal resistor)
Over-range Indication on all
functions
Display “OL”
In Ohms Function readings > 2.99 will be displayed as >3
Operating Environment,
Relative Humidity
0°C to 50°C (32°F to 122°F) 80%RH
Storage Environment:
0°C to 50°C (32°F to 122°F) at <80% RH
Case Construction: ABS UL 94V/0/5VA rated
Safety UL3111, and Design to comply with IEC
1010-1 Cat III @ 150V AC RMS,
UL for GFCI,
UL for AFCI
Table 2, Ranges and Accuracy Specifications
1
Resistance greater than 3 ohms on the Hot conductor or greater that 3 ohms on the neutral conductor
should be verified via alterative methods.
2
Resistance greater than 3 ohms on the ground should be verified via an alterative method.
Measurement Ranges Resolution Accuracy
Line Voltage/Trms 85 to 280VAC 0.1V 1.0% ± 2 digits
Line Voltage/Peak
121 to 340VAC 0.1V 1.0% ± 2 digits
Frequency
45.0Hz to 65.0Hz 0.1Hz 1.0% ± 2 digits
% Voltage Drop
Calculated 12A, 15A and 20A 0.1% 2.5% ± 5 digits
Voltage Drop
Calculated 12A, 15A and 20A 0.1V
2.5% ± 5 digits
Neutral-Ground V
0.0V to 10.0V RMS 0.01v
2.5% ± 5 digits
1 2
Impedance - Hot ,
Neutral, & Ground
0.00Ω to 2.99Ω
0.01
5.0% ± 5 digits
> 2.99  - Unspecified. -.0-
GFCI Trip Time
1ms to 6500ms counter. .0001mS 1.0% ± 2 digits
GFCI Trip Current Between 6mA to 9mA 0.01A 1.0% ± 2 digits