User Manual
- 25 -
•
Maintenance and cleaning
•
•
The blade lever (A) should never fall
automatically. If necessary tighten the
hexagon screw. Remove the cover (K),
remove the two screws (P) on the cover
(1.).Close the clamp (2.). Release the blade
lock (3.) and move the blade lever slightly to
the left (4.). Remove the cover (5.).
If required:
Turn the screw for blade depth adjustment (E)
to the right. If the setting on the adjustment
screw is altered then it must be turned back
to its original position or the blade depth
adjustment must be readjusted.
(see page 22)
A
K
P
1
23
4
5
E
35
22