User Manual
- 22 -
Check the cutting depth:
Open the clamp by moving the
clamp lever to the right (1.).
Remove all tools and place sheets of
paper along the entire cutting length.
• Lower the blade lever as far as it will
go (2.).
• Press the blade holder (3.) lightly and
turn the knob for blade depth
adjustment (E) to the left (+) until
the paper is cut along the entire width.
(1 turn = 1,5 mm)
Danger!
Blade must always be covered by
the clamping bar. Risk of injury!
(see picture below on the left).
Clamping
Blade
OK
OK
Blade
) (
) .(
) (
) (
.
.
Pressung
OK
Messer
OK
:
). (
.
•
)..(
•
). (
)(
(+)
.
)
=
(
!
!
!
)
(
.
Clamping
) (
) .(
) (
) (
.
.
Pressung
OK
Messer
OK
:
). (
.
•
)..(
•
). (
)(
(+)
.
)
=
(
!
!
!
)
(
.
OK
OK
1
•2
•
E) (.3
1 1.5
X
•
Blade and cutting stick replacement
•
•