User Manual

- 14 -
If the cutting quality decreases:
• Check the cutting depth (see page 22).
• Check the cutting stick (see page 16).
• Replace or re-grind the blade
(see page 14 - 23).
The blade cannot be ground if the blade
height is less than 83 mm / 3,29 inches.
A new blade must be used.
Purchase the new blade from Krug & Priester,
D -72336 Balingen only.
The blade may only be ground by a qualied
workshop or from the manufacturer
Krug & Priester, D -72336 Balingen.
Danger! Risk of injury
The blade is extremely sharp. Do not
dismount or transport the blade without
protection. Changing the blade may only
be performed by trained staff.
•
Blade and cutting stick replacement
• •
22
16
23
14