MSDS

3
P a g e
SECTION VI ACCIDENTAL RELEASE MEASURES
SPILL CLEANUP PROCEDURES: Eliminate all sources of ignition. Evacuate unprotected
personnel from the area. Maintain adequate ventilation. Contain spill, place in drums for proper
disposal. Soak up residue with inert absorbent material. Place in containers for immediate
disposal. Flush remaining area with water to remove trace residues and dispose properly. Avoid
direct discharge into sewers and surface water.
SECTION VII HANDLING and STORAGE
HANDLING
Avoid eye contact. Do not swallow. Avoid prolonged contact with skin. Use
with adequate ventilation. Do not eat, or smoke in work area.
STORAGE
Store in a cool, well ventilated area, out of direct sunlight. Store in a dry
location away from heat. Keep away from incompatible. Keep containers
tightly closed. Do not freeze.
SECTION VIII EXPOSURE CONTROLS/PERSONNEL PROTECTION
ENGINEERING CONTROLS
Maintain adequate ventilation. Do not use in closed or confined
space
RESPIRATORY
PROTECTION
None required under normal use.
EYE/FACE PROTECTION
Not required for normal use.
SKIN PROTECTION
Not required for normal use.
GENERAL
Any chemical must be removed form the skin before eating or
smoking.
Exposure Guidelines
OSHA ACGIH
Material
PEL
STEL/C
TWA
STEL/C
Fragrance
NE
NE
NE
NE
Dimethyl glutarate
NE
NE
NE
NE
Dimethyl adipate
NE
NE
NE
NE
Ethoxylated linear alcohol
NE
NE
NE
NE
Methylchloroisothiazolinone
NE
NE
NE
NE
Methylisothiazolinone
NE
NE
NE
NE
Tocopherol
NE
NE
NE
NE
Primary alkane sulfonate
NE
NE
NE
NE
SECTION IX PHYSICAL and CHEMICAL PROPERTIES
BOILING POINT
212 °F 100°C
oF
F
F
SPECIFIC GRAVITY (H
2
O=1)
1.000
PERCENT VOLATILE BY WEIGHT (%)
N/A
SOLUBILITY IN WATER
Infinite
pH =
5.7 – 6.7
-
PERCENT SOLID BY
WEIGHT (%) <15
APPEARANCE AND ODOR
Clear liquid, lemon/citrus odor
IS MATERIAL: LIQUID SOLID GEL
GAS PASTE
POWDER
FLASH POINT >200°F method used C.O.C
FLAMMABLE
LIMITS
LEL
UEL