Cut Sheet

Hand Tools
www.idealindustries.com 1-800-435-0705 for Customer Service
C-28
Phillips
■ Vapor-blasted tip prevents plate chipping
■ Identification mark on ends
■ Nickel-chrome plating for corrosion resistance
■ Tough, chrome vanadium steel shank
■ Cushioned rubber grip
Description Blade Length Total Length Cat. No.
#1 Tip Phillips 3 in. 6-3/4 in. 35-193
#2 Tip Phillips 1 in. 3-3/8 in. 35-191
#2 Tip Phillips 4 in. 8-3/8 in. 35-194
#2 Tip Phillips 6 in. 10-3/8 in. 35-195
#3 Tip Phillips 6 in. 11 in. 35-196
■ Precise tip for square-recess screws
■ Color-coded handle for easy identification
■ Nickel-chrome plating for corrosion resistance
■ Tough, chrome vanadium steel shank
■ Cushioned rubber grip
Description Color Code For Screw Sizes Cat. No.
#0 x 4 in. Yellow 3, 4 35-690
#1 x 4 in. Green 5, 6, 7 35-691
#1 x 8 in. Green 5, 6, 7 35-692
#2 x 4 in. Red 8, 9, 10 35-693
#2 x 8 in. Red 8, 9, 10 35-694
#3 x 4 in. Black 12, 14 35-695
#3 x 8 in. Black 12, 14 35-696
Square Head
Quick-Rotating
■ Ideal for threading screws in switches, fixtures and anchors
■ Identification mark on ends
■ One-handed crank action for quick and easy use
■ Vapor-blasted tip prevents plate chipping
■ Precision-ground tip provides secure fit in screw slot
■ Nickel-chrome plating for corrosion resistance
■ Tough, chrome vanadium steel shank
■ Cushioned rubber grip
Description Total Length Cat. No.
3/16 in. Shank and Tip 8-3/4 in. 35-200
#2 Phillips Tip and 1/4 in. Shank 9-3/4 in. 35-203
Screw-Holding
■ Split blade wedges into screw slot when collar is extended
■ Holds screw in place when installing in hard-to-reach locations
■ Tough, chrome vanadium steel shank and comfort grip handle
Description Blade Length Total Length Cat. No.
3/16 in. 4 in. 8 in. 35-404
3/16 in. 6 in. 10 in. 35-406
3/16 in. 8 in. 12 in. 35-408
Awl
■ Heavy-duty construction for piercing, punching and scribing
■ Identification mark on end
■ Cushioned rubber grip
Description Blade Length Total Length Cat. No.
Awl 3 in. 6-3/4 in. 35-202