Install Instructions

8
Step 2 – Strip
Strip off 2 inches of the outer jacket.
Step 1 – Cutting
Aciduis num do odolendigna
Flatten the pairs so they are close together and in the right
color sequence. Then trim them to
1
⁄2 inch from the outer jacketing.
Slip plug onto the cable as shown. Gold pins of plug are facing
the installer. Otherwise, the resulting connection will be mis-wired.
Step 4 – Terminate
Terminate the plug using a
modular plug crimping tool.
Simply insert it into the RJ-45
die in the tool and squeeze
the handles firmly.
Flatten all
pairs together
T568A
T568B
Terminating Data
Modular Plugs
CAT. NO. 45-165
(NOTE: Wiring configurations reflect flat surface
of the modular plugs facing up, with tab side down.
CAT. NO. 30-522
Step 3 – Wiring Configurations
Separate the twisted pairs into the proper sequence
either EIA/TIA 568 A or B.
Trim conductors
1
⁄29
Insert wire pairs into plug
CAT. NO. 30-496