Install Instructions

5
Coaxial Installation Steps
Fold back the braiding over outer jacket of cable. Do not
fold back the layer of foil that surrounds the dielectric.
Step 1 – Cut
Cut Cable
Cut cable using a round cutter
to maintain cable geometry.
1
⁄49 Max
1
⁄49
Jacket
Dielectric wrapped
in braiding
Center
conductor
Coax Stripper
CAT. NO. 45-603
Fold back braiding
Step 2 – Strip
Strip Cable
All F-connectors and BNC compression connectors require
a two-step ¼9, ¼9 strip. Crimp BNC connectors require a
3 step strip. (See product packaging for instructions.)
Data T-Cutter
CAT. NO. 45-074
Strip cable by inserting cable into stripper and rotate stripper
several times around the cable. A properly stripped cable should
have ¼9 of braiding and ¼9 of center conductor exposed.