Install Instructions

RTTRTRRT
12345678
-++-+--+
Pair 1
Pair 2
Pair 3
Pair 4
POLARITY
TIP
RING
TIP
RING
TIP
RING
TIP
RING
Pair 1
Pair 2
Pair 3
Pair 4
A. Band
Twisted-Pair
Wire
B. Solid
Twisted-Pair
Wire
14
Step 1 – Cut, Strip
Trim end of cable and strip off
1
⁄4 inch of outer
jacket of cable with tool as shown.
Step 2 – Terminate
Insert stripped wires into RJ-11 plug
(follow below color codes). Maintain the
order of the wires while inserting into plug.
Strip outer jacket and trim cable to
1
⁄49
Insert connector into RJ-11
die nest in middle of tool.
Squeeze handles firmly to
crimp the connector.
Step 3 – Testing
Test the cable with a continuity tester to
make sure cable is properly terminated
with no opens, shorts, or miswires.
Wire Color Codes—
Convert “Old” to New
Standard 4-Pair
Wiring Color Codes
PAIR 1
T
R
White/Blue
Blue
PAIR 2
T
R
White/Orange
Orange
PAIR 3
T
R
White/Green
Green
PAIR 4
T
R
White/Brown
Brown
Note: For 6-wire jacks use pair
1, 2 and 3 color codes. For 4-wire
jacks use pair 1 and 2 color codes.
CAT. NO. 30-496
See page 9 for wire error definitions.
CAT. NO. 33-856
Terminating Telephone
Modular Plugs