Cut Sheet

Thisfamilyofpolyesterblocksisidealforhightemperatureapplications.Theruggedmaterial
withstandstemperaturesupto302°F(150°C)
• Threecontactstylescoverbroadwirerange—acceptsinglewireorcombinationsfrom22AWG
 to8AWGsolidorstranded
• Ratedat15Ato50Apercircuit
• Flatbasemodelsmountdirectlytosurfaces;dovetailbasemodelsmountonstandardchannel
• Onlyoneendsectionneededperblockassembly
• Readilyidentifiablecircuits-writedirectlyonmattesurfaceofblock
• Sectionssnap-fitwithHeavyDuty,IntermediateHeavyDutyandFuseblocks
A-28
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
TerminaL BLoCKs
Wire TerminaTion
100 Series Terminal Blocks - Miniature (High Density)
Theseminiatureterminalblocksfitonamuchsmallerchanneltosavevaluablepanelspaceorcanbesurface
mounteddirectlytothepanel.Miniatureblocksacceptwireaslargeas12AWG.
• Nowirecrimpingrequired–clampcontactsholdwirefrom30AWGto12AWGbetterthancrimp-on
 terminals
• Savesinstallationtimeandcost–tubularclampcontactssuppliedwithcaptivescrewsbackedout
• Nylonhousingforruggedapplications
• Positivestoppreventswirefrombeinginsertedtoofarandpreventsscrewfrombeingtightenedon
 insulation;easyaccesscontactprovidessafe,reliableandcost-effectiveconnection
• Quickinstallationandchange–additionalsectionsmaybeaddedorremovedwithoutremoving
 channelmountingscrew
• Matte-finishareaformarkingdirectlyonblock
WIRE RANGE: Solid or Stranded
Tubular Clamp
1 #12 AWG, 1 #14 AWG, 1 to 3 #16 AWG, 1 to 5 #18 AWG, 1 to 6 #20 AWG,
1 to 7 #22 AWG
Catalog Number -
100 Series
125 115
End Section
130 120
Mounting Style
Direct
Mount
(Flat Base)
Channel
Mount
(Dovetail Base)
Direct
Mount
(Flat Base)
Channel
Mount
(Dovetail Base)
Housing Material Nylon
Maximum Service Temperature 125°C (257°F)
Flammability UL94V2
Wire Strip Length (in.) 5/16
Torque (in-lbs.) 6-9
UL Rating 28A @ 300V
Wire Range (AWG) Solid & Stranded 30-12
Pitch (in.) 0.25
Terminals per foot 48
900 Series Terminal Blocks - MEDIUM Duty
Housing Material Polyester (gray)
Contact Material Copper Alloy, Zinc Plated
Screw Material Steel, Zinc Plated
Maximum Service Temperature 150°C (302°F)
Flammability UL94V-0 Rated
Specifications
Center-to-Center Spacing: .375 in.
Voltage Rating: 600 Volt max., Current: 50 Amp max.
WIRE RANGE: Solid or Stranded
Strap Screw – 1 #22 to 1 #14 AWG
Tubular Screw – 1 #8 AWG, 1 #10 AWG, 1 to 3 #12 AWG, 1 to 4 #14 AWG, 1 to 4 #16 AWG, 1 to 5 #18 AWG, 1 to 10 #22 AWG
Tubular Clamp – 1 #10 AWG, 1 or 2 #12 AWG, 1 to 3 #14 AWG, 1 to 4 #16 AWG, 1 to 5 #18 AWG, 1 to 10 #22 AWG
Catalog Number 921 0921 924 0924 925 0925 930 0930
Mounting Style
Direct Mount Channel Mount Direct Mount Channel Mount Direct Mount Channel Mount End Section End Section
(Flat Base) (Dovetail Base) (Flat Base) (Dovetail Base) (Flat Base) (Dovetail Base) (Direct Mount) (Channel Mount)
Ampacity 15A 50A 30A — —
Contact Type Strap Screw Tubular Screw Tubular Clamp — —
Screw Type
6-32 10-32 10-32
— —
Combo Head Combo Head Combo Head
Screw Torque 12 in-lbs. 8 in-lbs. 8 in-lbs. — —
Wire Range (AWG) #14 to #22 #8 to #22 #10 to #22 — —