Cut Sheet

C-6
WWW.IDEALINDUSTRIES.COM 1-800-324-9571 CUSTOMER ASSISTANCE
StripmaSter
®
Short stop-latch protects wire strands by
limiting the stripping stroke to 5/32 in. and
retains the slug until the wire is ready
for terminating.
Transparent wire stop provides
uniform stripping length.
Gripper pads are available in your choice of
either parallel, file or grit-type. File-type pads
may be used on hard-to-grip insulations.
Stationary Gripper for
Black Handle Units
For 16 thru 30 AWG wire.
Replacement Frame Assemblies
Optional Accessories
For Custom Stripmaster
®
and Custom Steel Stripmaster
®
Wire
Strippers
Surface
Type
Gripper Set*
Cat. No.
Movable Gripper
Cat. No.
Stationary Gripper
(Thickness)
Grit**
LB-197 L-5212 L-5215 (.129 in.)
Grit**
LB-198 L-5212 L-5217 (.156 in.)
File
LB-721 LB-718 LB-719 (.129 in.)
File
LB-722‡ LB-718 LB-720 (.156 in.)
Parallel
LB-730 LB-727 LB-728 (.129 in.)
Parallel
LB-731 LB-727 LB-729 (.156 in.)
For Custom Stripmaster
®
Lite Wire Strippers
Surface
Type
Gripper Set*
Cat. No.
Movable Gripper
Cat. No.
Stationary Gripper
(Thickness)
Grit*
LB-1188 LB-882 LB-883 (.109 in.)
File
LB-1189 LB-1184 LB-1185 (.109 in.)
Parallel
LB-1190 LB-1186 LB-1187 (.109 in.)
* Gripper Set includes one movable gripper, one stationary gripper.
** Grit pads are standard for most Custom Stripmaster
®
and Custom
Stripmaster
®
Lite products.
‡ These are for use on hard-to-grip surfaces.
Gripper pad selection depends on insulation type and user preference.
Note: For 10-14 AWG, use .129 in. stationary gripper. For 16-30 AWG, use .156 in.
gripper.
Replacement Gripper Pads
Short Stop-Latch Cat. No.
For Custom & Custom Steel Stripmaster
®
Wire Strippers L-5269
For Custom Stripmaster
®
Lite Wire Strippers LB-1194
Transparent Adjustable Wire Stop Assembly Cat. No.
For Custom & Custom Steel Stripmaster
®
Wire Strippers L-5270
For Custom Stripmaster
®
Lite Wire Strippers LB-1195
For Custom Steel Stripmaster
®
Wire Strippers Cat. No.
Frame only, 10-14 AWG LB-1091
Frame only, 16-30 AWG LB-1092
Frame only, 10-14 AWG, internal spring (see note) LB-1090
Frame only, 16-30 AWG, internal spring (see note) LB-1089
Note: Frames with internal springs allow additional blade penetration pressure for
difficult and multi-layered insulation types.
For Custom Stripmaster
®
Lite Wire Strippers Cat. No.
Frame only LB-895
Frame only, Wire Stop and Latch LB-896
For Custom Stripmaster
®
Wire Strippers Cat. No.
Frame only, 10-14 AWG L-5616
Frame only, 16-30 AWG L-5617
Frame only, 10-14 AWG, Wire Stop and Latch L-5618
Frame only, 16-30 AWG, Wire Stop and Latch L-5619
Frame only, 10-14 AWG, internal spring (see note) L-9039
Frame only, 16-30 AWG, internal spring (see note) L-9038
Note: Frames with internal springs allow additional blade penetration pressure for
difficult and multi-layered insulation types.
Stationary Gripper for Red
Handle Units
For 10, 12 & 14 AWG Wire
L-5215
.129
.156
L-5217
StripmaSter
®
Wire StripperS