Cut Sheet

B-77
1-800-435-0705 Customer AssistAnCe WWW.iDeALinDustries.Com
Tools & supplies
HeaT sHrinKable Tubing
Expanded
I.D. (Min.)
Recovered
I.D. (Max.)
Recovered
Wall Thickness
+/-10%
Cable Dia. Range* Length Cat. No.
0.55”/14mm 0.18”/4.5mm 0.079”/2.0mm 0.20”/5mm - 0.47”/12mm 1.77”/ 45mm
46-381
0.98”/25mm 0.31”/8mm 0.091”/2.3mm 0.39”/10mm - 0.71”/18mm 2.76”/ 70mm
46-382
1.38”/35mm 0.59”/15mm 0.118”/3.0mm 0.67”/17mm - 1.18”/30mm 3.35”/ 85mm
46-383
2.95”/75mm 1.38”/35mm 0.138”/3.5mm 1.77”/45mm - 2.76”/70mm 5.12”/ 130mm
46-384
*Consult the wire manufacturer’s catalog for specific O.D. of wire and insulation.
Thermo-Shrink
®
Heavy-Wall Heat Shrinkable Tubing
• TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratio
• Adhesive liner provides complete insulation and protection to electrical
splices in above-grade, underground or underwater applications
• Maximum flame retardancy
• Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground
Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test,
ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
• Continuous operating temperature from -55°C to 110°C
• Rated for 600V, 90°C continuous use
• Shrink temperature of 120°C
Model
Expanded l.D.
(Min.)
(In.)
Recovered I.D.
(Max.)
(In.)
Nominal Recovered
Wall Thickness
(In.)
Cable
Range*
Length
(In.)
Cat.
No.
TS-46-400 .400 .150 .060 12-6 AWG
6 46-343
9 46-344
48 46-346
TS-46-750 .750 .240 .090 8-1/0 AWG
6 46-347
9 46-348
48 46-350
TS-46-1100 1.100 .350 .120 2-4/0 AWG
6 46-351
9 46-352
48 46-354
TS-46-1500 1.500 .470 .160
3/0 AWG-
400 KCMIL
9 46-356
12 46-357
48 46-358
TS-46-2000 2.000 .630 .160
250-750
KCMIL
9 46-369
18 46-371
48 46-372
*Reference only. Consult the wire manufacturer’s catalog for specific O.D. of wire and insulation.
Properties Heavy Wall
Shrink Temperatures 120°C to 250°C (200°C recommended)
Continuous Operating Temperature -55°C to 110°C
Tensile Strength (PSI) 2,100 PSI min.
Ultimate Elongation 600% min.
Secant Modulus @ 2% Strain 25,000 PSI max.
Specific Gravity 1.20 max.
Heat Aging, 168 hrs. @ 175°C Tensile Strength Elongation 500%
Heat Shock, 4 hrs. @ 225°C No cracks, flowing or dripping
Flammability Self-extinguishing
Low Temperature Brittle Point -55°C
Volume Resistivity 1013ohm-cm min.
Dielectric Strength 500V/mil (20kV/min.)
Corrosive Effect Non-corrosive
Solvent Resistance 24 hrs. Immersion per MIL-DTL-23053 Good to excellent
Water Absorption 0.5%
Fungus Resistance No growth
Longitudinal Change, 3 min. +1%/-10%
All values are typical performance data and are not to be used as design data.
LISTED