Material Safety Data Sheet

Pro-Pull Rope
SECTION IV - HEALTH HAZARD INFORMATION
EFFECTS OF OVEREXPOSURE - Conditions to Avoid
No chronic effects known.
None
THRESHOLD LIMIT VALUE
N/E
PRIMARY ROUTES OF ENTRY Inhalation Skin Contact Other (specify) Molten polymer causes thermal burns.
EMERGENCY FIRST AID PROCEDURES
SKIN CONTACT: For molten polymer, cool rapidly with water. Do not attempt to remove from skin. Obtain medical attention for burn.
EYE CONTACT:
Flush with water.
INGESTION:
Flush with water for 15 minutes.
SECTION V - REACTIVITY DATA
UNSTABLE
CONDITIONS TO AVOID
Direct exposure to flame or excessive heat.
STABLE
X
INCOMPATIBILITY (materials to avoid)
None
HAZARDOUS DECOMPOSTION PRODUCTS:
Oxides of Carbon
MAY OCCUR
CONDITIONS TO AVOID
None
WILL NOT OCCUR
X
SECTION VI - SPILL AND LEAK PROCEDURES
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED
Sweep up to prevent tripping.
WASTE DISPOSAL METHOD
Landfill or incinerate in accordance with local, state and federal guidelines.
CERCLA (Superfund) REPORTABLE QUANTITY (in lbs)
N/A
RCRA HAZARDOUS WASTE NO. (40CFR 261.33)
N/A
VOLATILE ORGANIC COMPOUND (VOC) (as packaged, minus water)
N/A
³ Theoretical lb/gal NA
³ Analytical lb/gal N/A
SECTION VII - PERSONAL PROTECTION INFORMATION
RESPIRATORY PROTECTION (specify type)
None normally required.
LOCAL EXHAUST (Specify Rate) None normally required.
SPECIAL N/A
MECHANICAL (General) (Specify Rate) Recommended in closed areas.
OTHER N/A
PROTECTIVE GLOVES (specify type)
EYE PROTECTION (specify type)
Per company policy.
OTHER PROTECTIVE EQUIPMENT
None
SECTION VIII - SPECIAL PRECAUTIONS
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING
Avoid excessive heat or open flames.
OTHER PRECAUTIONS
None
SECTION IX - ADDITIONAL INFORMATION
None
N/A = Not Applicable, N.E. = None Established
THIS MATERIAL SAFETY DATA SHEET PREPARED BY:
NAME James R. MacMurdo
SIGNATURE
TITLE Mgr., Construction Market Development
DATE: 12/3/2010
STABILITY
HAZARDOUS
POLYMERIZATION
VENTILATION