SDS

Aqua-Gel
®
CW Wire Pulling Lubricant
SDS#: ID003
Revision Date: June 7, 2015 Page 5 of 10
Appearance
Physical state: Gel
Form: Clear gel.
Color: Red.
Odor: Mild odor.
Odor threshold: No data available
pH: 6.5 – 8.0
Melting point/freezing point: No data available
Initial boiling point and 100
o
C (212
o
F)
boiling range:
Flash point: None
Evaporation rate: No data available
Flammability (solid, gas): Not applicable
Upper/lower flammability or explosive limits
Flammability limit – lower %): No data available
Flammability limit – upper (%): No data available
Explosive limit – lower (%): No data available
Explosive limit – upper (%): No data available
Vapor pressure: No data available
Vapor density: No data available
Relative Density: 1.09-1.11
Solubility(ies): Infinite.
Partition coefficient (n-octanol/water): No data available
Auto-ignition temperature: No data available
Decomposition temperature: No data available
Viscosity: 10000-15000 cps
Other information:
% Volatile by volume: < 45%
Percent solids by weight: ~ 60%
SECTION 10: Stability and Reactivity
Reactivity: Not chemically reactive.
Chemical stability: Stable under normal ambient and anticipated
conditions of use.
Possibility of hazardous reactions: Hazardous reactions not anticipated.
Conditions to avoid: Avoid prolonged storage at temperatures exceeding
180
o
F.
Extreme temperatures of combustion or burning and
contact with nitrites could result in the formation of
nitrosamines which are potential carcinogens.
Incompatible materials: Avoid contact with strong oxidizers and nitrates.
Hazardous decomposition Products: Oxides of carbon and nitrogen.
SECTION 11: Toxicological information