Cut Sheet

ManualsBrandsIdeal ManualsConnectorsLuminaire Disconnect, 6 to 14 AWG

IDEAL

- BUCHANAN

SLK™

DISCONNECT FUSE KITS

FEATURES AND BENEFITS

 UL listed for submersible installations when used with boots

 Bright orange for ease of visibility

 Breakaway or non-breakaway

 On Breakaway versions, fuse stays in de-energized load side when disconnected

 In-Line or Y-Tap versions available

 One or two wires on line or load side

 Crimp or set screw wire termination

 Dual (hot/hot) and Paired (hot/neutral) configurations available

 Neutral (i.e., non-fused) versions include dummy fuse

 Rated for copper and aluminum

 Thermoplastic elastomer boots for excellent durability and environmental protection

 Bold, clear markings for easy installation

 Accepts 13/32” x 1½” midget fuses (non-rejection and rejection type)

SPECIFICATIONS

COMPLIANCE:

UL ECIS Special Purpose Connectors,

which includes compliance with:

 UL 486A/B (Wire Connector)

 UL 486D (Submersibility)

 UL 498 (Attachment Plugs & Receptacles)

 UL 1682 (Plugs, Receptacles, & Cable Con-

nectors)

Conforms to AASHTO’s

Roadway Lighting Design Guide,

Chapter 8, October 2005

ELECTRICAL: 30 A, 600 V

WIRE RANGE: 2 AWG — 14 AWG

TEMPERATURE: 105°C

FUSEHOLDER FLAME RATING: 94V-2

BOOTS: Thermoplastic elastomer

FUSE HOUSING: Polypropylene

FUSE CONTACTS: Tin-plated brass

CRIMP SLEEVES: Tin-plated brass

SET SCREW LUGS: Tin-plated brass

FUSE SIZE ACCEPTED: 13/32” x 1½”

COPPER & ALUMINUM RATED

SCAN QR CODE

FOR DEMO VIDEO:

Summary of content (4 pages)

PAGE 1
IDEAL® - BUCHANAN SLK™ DISCONNECT FUSE KITS SCAN QR CODE FOR DEMO VIDEO: FEATURES AND BENEFITS              UL listed for submersible installations when used with boots Bright orange for ease of visibility Breakaway or non-breakaway On Breakaway versions, fuse stays in de-energized load side when disconnected In-Line or Y-Tap versions available One or two wires on line or load side Crimp or set screw wire termination Dual (hot/hot) and Paired (hot/neutral) configurations available Neutral (i
PAGE 2
IDEAL® - BUCHANAN SLK™ DISCONNECT FUSE KITS CONFIGURATION EXAMPLES DIMENSIONS Some illustrations enlarged to show detail Not all configurations shown (Images not to scale) CRIMP FUSEHOLDER SET SCREW FUSEHOLDER CRIMP FUSEHOLDER IN-LINE FUSED (ONE WIRE LINE/LOAD ) IN-LINE NEUTRAL (ONE WIRE LINE/LOAD ) SET SCREW FUSEHOLDER Y-TAP (TWO WIRE LINE, ONE WIRE LOAD) Y-TAP (TWO WIRE LINE/LOAD) IN-LINE AND Y-TAP DUAL (ONE WIRE LINE/LOAD ) PAIRED (ONE WIRE LINE/LOAD) DUAL AND PAIRED Note: Neutral versions u
PAGE 3
IDEAL® - BUCHANAN SLK™ DISCONNECT FUSE KITS ORDERING INFORMATION TO DETERMINE WHICH KIT TO USE: 1. Select the base part number, based on crimp termination (TABLE 1) or set screw termination (TABLE 2), number of wires on line/load side, and wire size. 2. If necessary, modify the base part number according to neutral, dual, paired, or non-breakaway configurations. Use TABLE 3 for crimp variations and TABLE 4 for set screw variations. 3. For examples, see the bottom of this page.
PAGE 4
IDEAL® - BUCHANAN SLK™ DISCONNECT FUSE KITS AVAILABLE PART NUMBERS Catalog Number 30-S1212 30-S1222 30-S1212N 30-S1222N 30-C1212 30-C1216 30-C1616 30-C1222 30-C1226 30-C1622 30-C1626 30-C1212N 30-C1216N 30-C1616N 30-C1222N 30-C1226N 30-C1622N 30-C1626N 30-S2212 30-S2222 30-S2212N 30-S2222N 30-C2012 30-C2016 30-C2216 30-C2616 30-C2022 30-C2026 30-C2222 30-C2226 30-C2626 30-C2012N 30-C2016N 30-C2216N 30-C2616N 30-C2022N 30-C2026N 30-C2222N 30-C2226N 30-C2626N 30-S2212T 30-C2012T 30-C2016T 30-C2216T 30-C2616T