Product Brochure

MARKETING COLLATERAL
TWISTER
®
PROFLEX
™
MINI
Made in U.S.A. of
U.S. and Global
Components
TWISTER
®
PROFLEX
™
MINI
WIRE CONNECTORS
WIDE WIRE RANGE | COMPACT SIZE | COMFORTABLE SWEPT WING DESIGN | FLEXIBLE SKIRT
idealind.com
Twister
®
Wire Connectors
Instructions
Connector Strip Length
340™ Twister
®
LT Orange
Strip wires #22-#18 AWG 3/8” (9,5mm)
Strip wires #16-#10 AWG 7/16” (11mm)
341
®
Twister
®
Tan Strip wires 1/2” (13mm)
342
®
Twister
®
Gray Strip wires 5/8” (16mm)
343 Twister
®
ProFLEX™ Mini Orange/Blue Strip wires: 7/16” (11 mm). For capping off single 14, 12 or 10 AWG conductors, strip wires: ¼”
344
®
Twister
®
Pro Tan/Red Strip wires 1/2” (13mm)
347 Twister
®
ProFLEX™ Red/Yellow Strip wires 1/2” (13mm); 7/16” (11mm) for 4 #10 AWG stranded
To be sold only with installation instructions.
Installation Instructions
1. Turn off power before removing or installing connectors.
2. Strip connectors to the correct strip length per the chart below:
Use only on Copper to Copper (Cu/Cu) wire combinations.
For use in dry locations only.
Temperature Rating: 105°C (221°F) maximum.
Voltage Rating: Models 340™, 341
®
, 342
®
, 343 and 344
®
: 600 volts maximum building wire; 1000 volts signs or lighting fixtures.
Model 347: 1000V maximum
IDEAL INDUSTRIES, INC.
Sycamore, IL 60178 U.S.A.
800-435-0705 Customer Assistance
www.idealind.com
IS 0031-2
For Models 340™, 341
®
, 342
®
For Model 344
®
For Models 343 & 347
WARNING
Improper use or installation of this product may cause fire, electrocution, serious personal injury or death. Shut off power to the circuit or remove fuse
before using this product. Use only connectors properly sized to the wiring being used. Consult local building codes for installation requirements.
WARNING: This product contains chemicals including, Antimony Oxide, which is known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3. Straighten wires and align frayed strands.
4. Hold wires together with ends even. Lead stranded wires slightly ahead of solid wires.
5. Pre-twisting acceptable, but not required. For pre-twisting; strip wires long, hold wires together with insulation even, twist wire ends together,
strip to recommended strip length.
6. Insert wire bundle into connector and twist clockwise until tight.
WE’VE GOT YOU
COVERED
TWISTER
®
PRO FAMILY
WIRE CONNECTORS
FLEXIBLE SKIRT
For extended protection
against bare wires.
(Models 343 & 347)
344
®
Twister
®
Pro
2 #18 to 4 #10
347
Twister
®
ProFLEX™
2 #18 to 4 #10
P-5584 2/21
774A Listed
Wire Connector
INDUSTRY LEADER:
• Widest Wire Combination Range of
any multi-colored connectors on
the market.
- Model 343:
Min. 2 #22 to Max. 4 #12 solid
- 344
®
& 347:
Min. 2 #18 to Max. 4 #10 AWG
• Model 347 - Highest voltage rating
in the industry at 1000V
343
Twister
®
ProFLEX™ Mini
2 #18 to 4 #12 Sol.
SELL SHEET
link
INSTRUCTION SHEET
link
POSTER
link