User manual

Programme selector dial, spin speed button and available options
Programme Selector Dial
It allows you to switch the appliance on/off
and/or to select a programme.
Spin Reduction
By pressing this button you can change the
spin speed of the selected programme.
Available options:
Rinse hold
By selecting this function the water of the last
rinse is not emptied out to prevent the fabrics
from creasing. Before opening the door it will
be necessary to empty out the water. To
empty out the water, please read the para-
graph «At the end of the programme».
Economy
Only for cottons and synthetic items lightly or
normally soiled at a temperature of 40°C or
higher. The washing time will be prolonged
and the washing temperature will be re-
duced. You can use this option if you want
to wash normally soiled laundry and at the
same time save energy.
Super Quick
Short cycle for lightly soiled items or for laun-
dry which needs only freshening up. We rec-
ommend you to reduce the fabrics loading.
Prewash
By selecting this option the machine per-
forms a prewash cycle before the main wash
phase. The washing time will be prolonged.
This option is recommended for heavily
soiled laundry.
Easy Iron
By selecting this option the laundry is gently
washed and spun to avoid any creasing. In
this way ironing is easier. Furthermore the
machine will perform some additional rinses
in some programmes. On cotton pro-
grammes the maximum spin speed is re-
duced automatically.
Extra Rinse
This appliance is designed for saving energy.
If it necessary to rinse the laundry using an
extra quantity of water (extra rinse), select
this option. Some additional rinses will be
performed. This option is recommended for
people who are allergic to detergents, and in
areas where the water is very soft.
Start Pause
This button allows you to start or to interrupt
the selected programme.
Delay Start
The programme can be delayed from 30 min
- 60 min - 90 min, 2 hours and then by 1 hour
up to a maximum of 20 hours by means of
this button.
Door locked pilot light
The pilot light 9 illuminates when the pro-
gramme starts and indicates if the door can
be opened:
• light on: the door cannot be opened. The
machine is working or has stopped with
water left in the tub.
• light off: the door can be opened. The pro-
gramme is finished or the water has been
emptied out.
• light blinking: the door is opening in a few
minutes.
10 Display
10.1 10.2
The display shows the following information:
10.1: Child safety lock
This device permits you to leave the appli-
ance unattended during it's functioning.
10.2:
• Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
ample
). The duration is calculated
automatically on the basis of the maximum
recommended load for each type of fabric.
After the programme has started, the time
remaining is updated every minute.
6